【
Start Setup
】
【
Exit Setup
】
29
Chapter 4 Communication Setup
HR15 Communication Mode Setup
Communication modes include: Synchronous, Asynchronous and Batch mode.
Synchronous mode: the HR15 will transmit the barcode data to the CD cradle after collecting when the network is
connected. If there is no network connection, the transmission will fail.
Asynchronous mode: the HR15 will transmit the barcode data to the CD1 cradle after collecting when the network is
connected.The barcode data will be stored in the FLASH if no network connection exists, and the barcode data will
be transmitted to the CD15 cradle when the network connection recovers.
Batch Mode: the HR15 will immediately store the barcode data into FLASH no matter the network connection exists
or not. Put the scanner
on the CD15 cradle, press the button ―p‖ to finish the batch transmission.
Synchronous mode
Asynchronous mode:
Batch Mode:
Serial Port Setup
Baud Rate Setup
When the CD15 cradle connects with host by serial port, both sides should set the same parameters in order to guarantee
the smooth communication, the baud rate (transmission speed) of communication is necessary.
Summary of Contents for NLS-HR15XX-3E
