【
Start Setup
】
【
Exit Setup
】
45
Read the barcode of ―Set the Minimum Length Limit‖ to adjust the minimum length limit.
Read the barcode of ―Set the Maximum Length Limit‖ to adjust the maximum length limit
Set the Maximum Length Limi
Set the Minimum Length Limit
Note
:
the maximum length limit of any 1D barcode must not exceed 255, if the maximum length is shorter than the
minimum length, then the scanner is only able to read the barcodes with the minimum length and the the maximum length;
if the maximum length equals to the minimum length, then the scanner is only able to read the barcode with such length
Example: Set the scanner read the AIM128 with barcode length between 8 to 12 characters.
1.
Read the
―Start Setup‖ barcode.
2.
Read the barcode of ―Set the Minimum Length Limit‖.
3.
Read the numeric barcode ―8‖, (see the appendix—numeric barcode)
4.
Read the ‗Save‖ barcode.(see the appendix—numeric barcode)
5.
Read the barcode of ―Set the Maximum Length Limit‖
6.
Read the numeric barcode ―1‖.
7.
Read the numeric barcode
―2‖.
8.
Read the ‗Save‖ barcode.(see the appendix—numeric barcode)
9.
Read the
―Exit Setup‖ barcode.
EAN-8
Restore Default Value
By reading the barcode, the parameter setup of EAN-8 will be restored to the factory default state.
Restore the Default Setup Value of EAN-8
Allow to Read EAN-8 or not
Allow to Read EAN-8
Prohibit Reading EAN-8
Summary of Contents for NLS-HR15XX-3E
