【
Start Setup
】
66
【
Exit Setup
】
minimum length, then the scanner is only able to read the barcodes with the minimum length and the the maximum length;
if the maximum length equals to the minimum length, then the scanner is only able to read the barcode with such length.
Matrix 2 of 5 (European Matrix 2 of 5)
Restore the Default Value
By reading the barcode, the parameter setup of Matrix2 of 5 will be restored to the factory default state.
Restore the Default Setup Value of Matrix2 of 5
Restore the Default Setup Value of Matrix2 of 5
Allow to Read Matrix2 of 5
Prohibit Reading Matrix2 of 5
Note: the scanner will become unable to read Matrix2 of 5 by reading the setup barcode ―Prohibit Reading Matrix2 of 5‖,
thus, if the scanner is unable to read the Matrix2 of 5, please try to read the setuo barcode ―allow to read Matrix2 of 5‖.
CodeID Setup
To activate the setup function by reading ―CodeID setup‖, then read the hexadcimal value inaccordance with the character
which will be set to the CodeID.
Code ID Setup
Example: Set the CodeID ofMatrix 2 of 5
to ―p‖ (the hexadcimal value is 0x70).
1. Read
the ―Start Setup‖ barcode.
2.
Read the ―CodeID Setup‖ barcode.
3.
Read the numeric barcode ―7‖, ―0‖ (see the appendix—numeric barcode)
4.
Read the ―Save‖ barcode.(see the appendix—numeric barcode)
5.
Read the ―Exit Setup‖ barcode.
Summary of Contents for NLS-HR15XX-3E
