【
Start Setup
】
68
【
Exit Setup
】
Note
:
the maximum length limit of any 1D barcode must not exceed 255, if the maximum length is shorter than the
minimum length, then the scanner is only able to read the barcodes with the minimum length and the the maximum length;
if the maximum length equals to the minimum length, then the scanner is only able to read the barcode with such length.
Industrial 25
Restore the Default Value
By reading the barcode, the parameter setup of Industrial 25 will be restored to the factory default state.
Restore the Default Setup Value of Industrial 25
Allow to Read Deutsche 12 or not
Allow to Read Industrial 25
Prohibit Reading Industrial 25
Note: the scanner will become unable to read Industrial 25 by reading the setup barcode ―Prohibit Reading Industrial 25‖,
thus, if the scanner is unable to read the Industrial 25, please try to read the setuo barcode ―allow to read Industrial 25‖.
CodeID Setup
To activate the setup function by reading ―CodeID setup‖, then read the hexadcimal value inaccordance with the character
which will be set to the CodeID.
Code ID Setup
Example: Set the CodeID ofIndustrial 25
to ―p‖ (the hexadcimal value is 0x70).
1.
Read the ―Start Setup‖ barcode.
2.
Read the ―CodeID Setup‖ barcode.
Summary of Contents for NLS-HR15XX-3E
