8
Charging the Battery
Connect the N7 to a power outlet using the included AC adapter or USB cable.
Note:
1. When the terminal battery is running low (at 20%), the battery icon in the notification bar at the top of the screen starts
flashing; when it goes down to 10%, the terminal emits beeping sounds and displays a prompt; when the battery is running
out, the terminal beeps and then shuts down automatically.
2.
If N7 battery is completely drained, please press the power key to turn it on after 15 minutes of being charged.
LEDs on the N7
When charging the N7 with AC adapter or USB cable, the user is notified the charging statuses by the LEDs on the terminal.
Charging/Battery Statuses
Green LED on
Fully charged
Red LED on
Charging in progress
Red LED flashes constantly
Low-battery alert
Scan/Decode
Blue LED flashes once
Scan successfully