3
BEFORE YOU START: READ NOTES OF TABLE A & B LAYOUTS
Check TABLE A for layout of 2-Sided shower
• Identify the size of shower you are working with.
• The door set has shared adjustment points: Wall and corner post positions.
• Walls bowed or leaning inwards:
Check adjustment available and use Min to Max Table B if your case requires
this.
Note:
3-Sided shower table is on page 9
.
2-Sided Shower: Ensure the floor is level and the walls are plumb and flat.
Position all framing for solid fixing for the shower tray, shower and plumbing fittings. Wall profiles
require a stud centred 20mm back from tray outside edge.
Ensure all plumbing items have been installed prior to the lining being attached.
Alcove Shower: The shower tray must be a firm fit to the framing prior securing the walls. Floors
must be level and flat. Walls also must also be plumb and flat. Two walls multiply errors and limit the
potential to fit the acrylic liner and shower screen.
PREPARATION CHECKLIST
DOOR SET
TRAY SIZE
CORNER
POST
ADJUSTMENT
WALL
ADJUSTMENT
RETURN PANEL
TRAY SIZE
WALL
ADJUSTMENT
TRAY EDGE TO WALL
CHANNEL
1
750mm
0
2
915mm
17
15mm
2
820mm
5
10
820mm
4
13mm
3
915mm
6
13
750mm
4
13mm
4
915mm
0
11
915mm
11
21mm
5
1000mm
0
4
1000mm
4
13mm
6
1200mm
0
2
915mm*
12
20mm
DOOR & RETURN
DOOR SET
RETURN PANEL
1
750mm x 900mm
Min 720mm — Max 740mm
Min 870mm — Max 888mm
2
820mm x 820mm
Min 778mm — Max 794mm
Min 790mm — Max 805mm
3
900mm x 750mm
Min 870mm — Max 890mm
Min 720mm — Max 738mm
4
900mm x 900mm
Min 870mm — Max 890mm
Min 870mm — Max 888mm
5
1000mm x 1000mm
Min 970mm — Max 990mm
Min 970mm — Max 988mm
6
1200mm x 900mm
Min 1165mm — Max 1185mm
Min 870mm — Max 888mm
Walls out of plumb will not allow for full Max/Min options.
TABLE A: LOW PROFILE TRAY 40mm High
TABLE B: MIN TO MAX PIVOT SHOWER RANGE
(LH column number ties up to Table A)
