NEWMAC MULTI FUEL AND SOLID FUEL HEATING UNIT
“LIMITED” WARRANTY
Subject to the following provisions Newmac Mfg. Inc. (Newmac) warrants the heating unit, to the original owner, under
normal use and repair, against defects in workmanship and materials, for a period of one calendar year from the date or
original installation. Blower, motor, controls and/or any other electrical or mechanical components, not manufactured by
Newmac, are not warranted by Newmac, but are warranted for a period of one year from date of original installation, by their
respective manufacturer. In addition to this comprehensive, unconditional one year, new product warranty, Newmac further
warrants the heat exchanger for an additional nine calendar years from date of original installation and in accordance with
the declining table as set out below.
THE NEWMAC EXTENDED CONDITIONAL HEAT EXCHANGER WARRANTY PROGRAM
(Warranty protection calculated from date of original installation)
Owner Warranty
Owner Replacement
Protection Charge
First full year
100%
0%
From year one through year two
80%
20%
From year two through year four
60%
40%
From year four through year six
50%
50%
From year six through year eight
40%
60%
From year eight through year ten
20%
80%
From year ten and over
0%
100%
NOTES
1. Owner Replacement Charges are expressed as a percentage of the replacement retail price prevailing at the time of
replacement purchase.
2. Newmac is NOT responsible for:
A. Labor charges generated by removal of malfunctioning component and re-installation of replacement component.
B. Freight charges generated by any form of transportation of replacement component.
C. Any applicable sales tax generated by the purchase of replacement component.
D. Corrosion is not covered under warranty regardless of cause.
General Conditions and Limitations
1.
The heating unit must be installed by a qualified licensed installer with the Newmac installation instructions. The heating unit
must also be installed in accordance with all applicable codes and the National Warm Air Heating and Air Conditioning
Association Standards or generally accepted equivalent standards.
2. The heating unit is NOT designed, or intended for use in a corrosive atmosphere (such as a concentration of acids or
halogenated hydrocarbons). The installation, and operation of the unit in such an environment, will be considered as
gross misuse, and all warranties will be automatically invalidated.
3.
The heating unit must not be modified away from its published design and/or specifications without prior written
authorization, for such modification, from Newmac.
4. The heating unit must be correctly sized to operate at its designed capability.
5. The heating unit must be correctly fueled to operate within its designed function.
6. The heating unit must be maintained and cleaned at regular intervals, and in accordance with instructions contained
in the Newmac owner’s manual.
7. Failure to comply with all the above stated qualifying conditions, will render the Newmac Warranty null, and void in its
entirety.
8. This warranty is the only warranty made by Newmac, and furthermore, Newmac does not authorize any person or
company to change, or alter, the conditions under which this warranty is provided. Newmac does not authorize any
person, or company, to provide any other warranty on its behalf.
9.
For routine service requirements, contact the dealer who installed the equipment originally or an alternate qualified and
registered heating dealer or electrician.
10. As previously stated herein, Newmac does not assume responsibility for costs of delivery or labour charges involved in the
replacement of defective component parts.
11. Newmac shall not be responsible for any consequential damage however caused whether by a defect in the heating
unit or any part thereof warranted hereunder or by the negligence of any person.
12.
This warranty is not effective unless the warranty registration card is properly filled out with all of the required information
and received at Newmac’s factory at the address below within (30) days from the installation date.
NOTE: Keep this warranty certificate and the instruction manual for future reference. To register your warranty, please complete
form below, detach and mail to Newmac Mfg. Inc. P.O. Box 9, Lancaster Cr; Debert, N.S. B0M 1G0
LIMITED LIFETIME WARRANTY REGISTRATION
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ ____ _ _ _ _ _ _ _ _ _ _ ____ _ __
Owner’s Name Date of Installation
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Address of Installation
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Dealer’s Name Dealer’s Address
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Furnace Serial Number Furnace Model Number
Summary of Contents for CL 115C
