Handle assembly
This stove is supplied with a bakelite handle when manufactured. If your preference is to use the
optional stainless steel handle, then please refer to the handle assembly picture for instructions on
how to change. The stove and handle will become very hot therefore it is recommended that an
approved five fingered heat proof glove of the correct size for each users hand is used to operate
this stove.
Bakelite Handle.
Step 1: Position Bakelite handle, screw and
washer fixings, into correct position with
steel elbow .Tighten screw securely.
Stainless Steel Handle.
The optional stainless steel handle is designed
to be of plug in and plug out type, this will
enable the handle to be removed when not
operating the door to avoid excessive heat
transfer into the handle when the stove is hot
due to the heat transfer.
For aesthetic purposes there is a handle grub
screw supplied enabling the handle to be
fixed into position when the stove is cold and
not being used.
