MANUAL EXTENSION AND RETRACTION
The slide out room may be manually retracted. Before attempting to manually extend or retract a slide
out room, please contact your servicing dealer or call Newmar Customer Support at 1-800-731-8300.
IMPORTANT
It is important to clean the slide out rollers under the floor regularly as dirt may adhere to the rubber coating on
these rollers and cause damage to hard surface flooring. Such damage is not covered under warranty.
These rollers may leave indentations in carpeting, linoleum and other flooring. This condition is normal and
does not warrant flooring replacement.
IMPORTANT
The TRANS-TORQUE bushing must be re-tightened to re-couple the slide out gear motor before moving the
coach. This will hold the slide out room in place. The correct torque on the 11/2" TRANS-TORQUE bushing is
110 foot pounds maximum. The correct torque on the 11/2" TRANS-TORQUE bushing of the K-900 motor
(center shaft motor) is 145 foot pounds maximum.
Slide outs with either the center or end mounted motors can be moved by pushing the room the full length of
its travel in either direction. This method will require the assistance of at least two people.
2015 Newmar King Aire Diesel Bus 51
Summary of Contents for King Aire 2015
