background image

ii 

 

Warranty 

Newport Corporation warrants that this product will be free from defects in 
material and workmanship and will comply with Newport’s published 
specifications at the time of sale for a period of one year from date of 
shipment. If found to be defective during the warranty period, the product 
will either be repaired or replaced at Newport's option.  

To exercise this warranty, write or call your local Newport office or 
representative, or contact Newport headquarters in Irvine, California. You 
will be given prompt assistance and return instructions. Send the product, 
freight prepaid, to the indicated service facility. Repairs will be made and the 
instrument returned freight prepaid. Repaired products are warranted for the 
remainder of the original warranty period or 90 days, whichever first occurs.  

Limitation of Warranty  

The above warranties do not apply to products which have been repaired or 
modified without Newport’s written approval, or products subjected to 
unusual physical, thermal or electrical stress, improper installation, misuse, 
abuse, accident or negligence in use, storage, transportation or handling. This 
warranty also does not apply to fuses, batteries, or damage from battery 
leakage.  

This warranty is in lieu of all other warranties, expressed or implied, 
including any implied warranty of merchantability or fitness for a particular 
use. Newport Corporation shall not be liable for any indirect, special, or 
consequential damages resulting from the purchase or use of its products. 

 First printing 2016 

© 2016 by Newport Corporation, Irvine, CA. All rights reserved. No part of 
this manual may be reproduced or copied without the prior written approval 
of Newport Corporation.  

This manual has been provided for information only and product 
specifications are subject to change without notice. Any change will be 
reflected in future printings.  

Newport Corporation 

1791 Deere Avenue 

 Irvine, CA, 92606 USA  

 

Part No.  90080319 Rev. A 

Summary of Contents for ACGP Series




















Reviews: