MCS260B
CORNERSTONE 260B MONOCHROMATORS
13
3 INITIAL SETUP
3.1
WHAT’S INCLUDED
•
Preselected diffraction gratings, installed and aligned.
•
Electronic shutter at input port.
•
A choice of single or dual output ports.
•
A choice of micrometer adjustable slits, motorized, or fixed slit holders at the input port and
output port(s).
•
Electronics interface for RS-232 or USB communication.
•
LabVIEW™ based utility software.
•
MonoTerm low-level command software.
•
Certificate of Calibration.
•
Monochromator Power Supply.
•
Line cords based on geographic location.
•
User’s manual.
3.2 UNPACKING
Remove all items from the shipping containers and verify each item is accounted for. The
instrument is carefully packaged to minimize the possibility of damage during shipment. Inspect
the shipping box for external signs of damage or mishandling. Inspect the contents for damage.
If any item is missing or damaged, immediately contact the Newport representative from whom the
system was purchased.
It is suggested to save the packaging material and shipping container, in case the equipment
needs to be relocated at a future date.
WARNING
Do not attempt to operate this equipment if there is evidence of shipping
damage or there is suspicion that the equipment will not operate correctly.
Damaged equipment may present hazards.
3.3 CHOOSING A LOCATION
Choose an installation location where the power requirements can be met for the monochromator,
as well as the rest of the optical system. Be sure power is not applied to the system until the setup
has been completed and all electrical connections made.
Ensure that there is easy access to the monochromator’s power switch and the electrical outlet.
