1.17
EDH0162En1040 – 06/99
MM4005
Introduction
1.3.6.2
Menu Structure
A wide range of functions can be performed from the front panel. To fully
explore its capabilities, carefully read Section 2, Local Mode, and experi-
ment with the controller. This paragraph gives only a brief introductory
description of the menu structure.
The bottom line on the display (line 6) is dedicated to the four function
keys. An option description field will appear above each key if it has an
active function in the current menu. Pressing a key will perform the select-
ed command or will change the display to a new menu level. This capability
to navigate between a number of menu levels to get to the desired com-
mand is the basis of the LOCAL mode operation.
1.3.6.3
Common Function Keys
Some of the function keys have the same definition in different menus. The
following descriptions list the most common keys and their functions.
Terminates the current operation and returns to the menu one level up. In
most cases, any unsaved entries are ignored.
Appears when an entry is required. It accepts the selected value and
advances the display to the next menu.
Activates a lower-level menu that enables the user to make changes to the
currently displayed parameter.
Scrolls the display up through a list of parameters.
Scrolls the display down through a list of parameters.
Is used when a numeric entry is required. It deletes the last character entered.
Note that for a value to be modified, it must first be activated and the
sym-
bol must precede it.
Scrolls the display through a number of choices in the same menu level.
1.3.6.4
Status Display
Pressing the
function key activates the display to provide addition-
al axis information. It does not change the menu level.
Fig. 1.9
— Axis Status.
To the left of the axis identifiers, as shown in Figure 1.9, there are four char-
acters that can appear depending on the status of each axis:
O
Will appear only if a Home Search routine has been performed success-
fully on that axis. It means that a mechanical origin has been found.
–
Indicates that the negative direction (usually left) limit switch has been
activated (tripped).
M A N U
P R O G .
1 :
2 :
3 :
4 :
2
1
2 . 3 4
m
m
n
U
d
c o n
5 6
3
-
. 3 5
m
m
6
n e c t
L
A
H O M E
S
t
e
a c t i o n
l e c
M O V E
. 3 4 5
D g .
e
O
O
M
M
+
+
–
STATUS
NEXT
DELETE
DOWN
UP
MODIFY
VALID
QUIT
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com