Hardware Installation
Please follow the steps below closely and in the order as
shown. Otherwise keyboard, mouse, audio, microphone and
video errors may occur.
Before starting with connecting your computers and console
devices to the NS-211KA make sure that everything is
powered off. Connecting devices while power is not off may
lead to damage to your computers or the NS-211KA. We will
not be held responsible for damage caused.
1.Place the NS-211KA in a convenient location, its small size
makes it easy to place it on the desktop. Do take the length
of the cables in consideration while placing the KVM switch
unit.
2.We will connect the console devices first now. Connect your
keyboard, Mouse and monitor to the NEWSTAR's cable
converter turns 15 pin HDDB.
.
3.Connect your Audio and Microphone to the front Rear of
the NS-211KA.The male 3.5mm plug to the Speaker and
Microphone in on the console of your NS-211KA as shown
below.
Hardware Installation
Here we will explain how to connect the console and the
computers to the NS-211KA switch unit. First the layout of
front and rear panel will be shown.
Front Panel Layout
Rear Panel Layout
Cable Conventer
Microphone
Audio
3
4
NS-211KA
NS-211KA
