Graphical User Interface
(GUI)
User Manual for AZ110 Broadcast Satellite Modulator with ASI interface
version 3.2
71
SHAPING THE FUTURE SATELLITE OF COMMUNICATIONS
6.4.7.2
Importing a Configuration
The possibility exists to import all 48 device configurations as a “.cfg” file from a
local computer.
Proceed as follows to import a configuration set:
1. Click the
Configs
Tab;
2. Click the
Import
button;
3. Browse to the location of the stored “.cfg” file;
4. Select the “.cfg” file and click
Open
. The stored configurations are loaded into
the Newtec device.
You can load any of the 48 configurations to view or test them.
5. The user has two options:
-
The user can keep the imported configurations. In this case, the user must
save the current imported configuration in bootconfiguration;
-
The user can decide to delete the imported configurations. In this case the
user must restart the device. The device will start up using the same
bootconfiguration as the previous start up.
6.4.8
Create a Diagnostics Report
Perform the following steps to create a diagnostics report.
Click
Misc
. tab;
Click
Diag. Report
Figure 34 - Create a Diagnostic Report
Basic
: The basic rapport shows all configuration parameters;
Full
: The full rapport shows all configuration parameters and all debugging
parameters.
