Newton cvr640, Instructions Manual

Indication LEDs
 

The video recorder is On
The video recorder is recording
Low batteries (voltage sank to 2.5-2.8V)
No memory card or memory card is full.

Blue LED:

Red  LED:

Is on
Blinking 
Blinking fast
Blinks for a couple of seconds,
recorder turns off. 

Installing the CVR640 on digital NV devices

The CVR640 is fitted with a mount which enables the unit to be affixed to a  



Weaver rail of your NV device. 
If your NV device does not have a Weaver rail, the CVR640 can be attached  



with the help of the supplied ¼” tripod socket adaptor. To do this, screw the  

adaptor into the tripod socket of a digital NV device and attach the CVR640 to 

the Weaver rail of the adaptor.   

Software 

The delivered memory card contains useful files as follows:

CVR640 Driver

 – Driver software for the CVR640 which serves to connect the 



unit to your PC. Install

this

driver

before

connection

.

CVR640 Video Converter

 – software to enable direct video recording to a PC 



hard disc. 



settime.txt

 – time and date setup file.  



   i

nstr_Video Recorder CVR640

 - 

user manual

The CVR 640 is compatible with operating systems Windows XP, Windows Vista 
and Windows 7.

Note:

 It is recommended that before use of the CVR640 you should save the 

supplied software to your PC. In case of loss of the software files, you can e-mail 
us at 

support

@yukonopticsglobal.com

Connection to PC



The CVR640 should be powered off.



Insert SD memory card into the CVR640, connect the CVR640 with the  

supplied USB cable to your PC – the CVR640 will be detected as a removable 

disc.  



With the help of Total Commander or another file manager you can handle the 

SD card as a removable disc. 

Note: 

Transmission speed from the memory card to the PC will not exceed 

1Mb/sec. 

Video recording to a PC hard disc



The CVR640 should be powered off and memory card removed. 



    Use a USB cable to connect the CVR640 to the PC. 



A window as shown in pic. 3 comes up. Now you will be able to handle the files 

recorded on the unit's memory card. Press

the

 “

EXIT

” 

button

when

finished

.

2

Pic. 2b

Connection to 

Digisight/Hornet

Pic. 3

N

ote

: it is not recommended to attach the CVR640 on riflescope

s

 because the video recorder 

is not designed for heavy shock resistance.