Newworld NW 50GSO Blk/444443994, Operating And Installation Instructions

-

When choosing a place for your cooker, do not place it near a refrigerator and make

sure 

there are no flammable or combustible materials in the surrounding area that could

catch 

fire with a cooker nearby, such as curtains, oil, cloth etc.

-

Make sure there is at least a 2cm gap between the back cover of the cooker and the wall

to help the air circulate.

-

Any furniture near the cooker must be made of materials that are resistant to heat up to

100°C.

-

Any kitchen furniture higher than the cooker top must be at least 10cm away from the

cooker's side. 

The minimum height between the cooker top and any existing wall cupboards and extractor 
fans with furniture fascias are shown above. Extractor fans inside a kitchen cabinet must be 
at a minimum height of 650mm from the cooker top. For exposed extractor fans, this height 
must not be less than 700mm.

3.3 ADJUSTING THE FEET

This cooker stands on 4 levelling legs. As the legs are initially on a lower position, you must 
adjust them to make sure the cooker is balanced before using it. If you need to balance the 
cooker, the legs can be adjusted by turning them clockwise. You can raise the cooker by a 
maximum of 30mm with the levelling legs. If you have had to adjust the cooker with the 
levelling legs make sure to move the cooker by lifting it rather than dragging it. The levelling 
leg can be adjusted by hand or a suitable size coin.

3.4 CONNECTING THE GAS

Connecting this gas appliance must be done according to local and international standards 
and the relevant regulations. You can find the information related to correct gas types and 
injectors on the technical data table on page 2

5

. If the pressure of the gas is different to the 

ones stated on the table or not steady in your area, then you must fix a pressure regulator 
onto the gas inlet. You must contact a qualified and certified gas registered technician to 
make these changes for you.

The points that must be checked during flexible hose assembly

-

If the gas connection is made by a flexible hose that is fixed onto the gas inlet of the

cooker, it must be fi

tted with

 a pipe collar as well.

-

Connect your appliance with a short and durable hose that is as close as possible to the

gas source.

-

The permitted maximum length of the house is 1.5m.

-

The hose that supplies the appliance with gas must be changed once a year for your

security.

-

The hose must be kept clear from areas that may heat up to temperatures of more than

90°C.

-

The hose must not be cracked, torn, bent or folded.

-

Keep the hose clear of sharp corners and objects that could move.

-

Before you assemble the connection, you must make sure the hose is not damaged with

bubbly water or leakage fluids.

-

Do not use a naked flame to check gas leakage.

-

All metal items that are used during gas connection must be free from rust, and check 

the expiry date of any components used for connections.