5
2-5.Battery Pack Box
The battery pack box is an optional item to be purchased separately.
3. To remove the battery pack, simply
pull battery pack firmly away from the
main unit. (See the Figure 9).
Important Notes Regarding
Rechargeable NI-MH AA Batteries:
1. EZDigiMagic DM220 requires (4) AA
Ni-MH batteries with a minimum current
of 1800 mA. Dry cell or alkaline batteries
do not meet this requirement. Based on
current amount of mA in rechargeable
batteries, usage times are as the
followings:
1800 mA 60 min
2000 mA 70 min
2. Battery Low indicator may blink
occasionally during the burning
operation. It is normal even if the battery
is fully charged.
3. If the Battery Low indicator blinks
continuously, recharge the batteries
immediately after completing the current
copy operation; otherwise, the next copy
operation may result in failure or a
damaged disc.
4. Batteries may discharge if they are not
used for a period of time. Make sure
batteries are fully charged before major
usage. (The amount of discharge is
dependent on the maker and model of
the batteries, Please consult battery
manufacturer’s data).
5. Please follow instructions provided by
rechargeable battery manufacturers for
operation, recharging, maintenance and
disposal of the batteries.
(
Figure 9
)
(
Figure 8
)
2. To install battery pack, align the
five guide hooks located on the
battery pack to the back of the
DM220 unit, then snap the battery
pack into the EZDigiMagic unit.
(See the Figure 8).
(
Figure 7
)
1. Install four AA rechargeable 1.2V
Ni-MH batteries into the battery
pack box. (Batteries and charger
are not included.) (See Figure 7).
Summary of Contents for EZDigiMagic DM220
Page 1: ......
Page 17: ...16 PN 44 919003 00 V1 00 ...