Nexans Advanced Networking Solutions
iGigaSwitch 542S SFP-2VI
o
Enhanced management features such as DHCP, VLAN, port prioritisation, IEEE802.1p, IPv4, IPv6, IEEE802.1Q
Tagging, QoS, etc.
o
Several different alarm and signalling traps for service and security support
o
Up to 8 different categorisable trap and/or syslog destinations
o
V.24 (RS232) setup and configuration interface
o
Memory card (MMC) for storing configuration files etc.
o
SET pushbutton for selecting different boot sequences
o
BootP protocol
Mechanical design
o
Compact design
o
Robust aluminium housing
o
Fanless system
o
DIN-rail mounting
Indicators
Easy-to-read LED combinations for displaying the operating status:
o
S1, S2 power supply
o
PSE state for Power over Ethernet supply
o
M1, M2 alarm
o
Run – switch is ready to operate
o
Link – status: Link and Receive data indication per port
o
Speed - Speed indicator TP-Ports: 10/100/1000 Mbps
Twisted Pair interfaces
o
Electrical interfaces according to
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
IEEE802.3ab 1000BASE-T
o
MDI/MDI-X auto-crossover and auto-polarity
o
10/100/1000 Mbps Ethernet / Fast Ethernet / Gigabit Ethernet Twisted Pair port – up to 100 m
o
Autonegotiation / 10/100/1000 Mbps Ethernet / Fast Ethernet / full-duplex or half-duplex
o
Shielded RJ45 sockets
SFP* Slot Interfaces
o
SFP-I plug-in slot for on-site accommodation with fiber-optic (GI, SM) or Twisted Pair plug-in modules – also in
mixed configurations. The state of module is only readable with SFP module incl. DMI** interface
o
according
IEEE802.3z 1000BASE-LX / 1000BASE-SX
IEEE802.3u 100BASE-LX / 100BASE-SX
IEEE802.3ab 1000BASE-T (Twisted pair)
Power supply
o
Input voltage nominal 24 VDC / 48 VDC (S1/S2)***
o
Redundant power supply
-
3 -
