ABS1555/B
16/24
DiStriBution cABinet
4.2. installation du câble réseau
Installation of the network cable
1. Préparer le passe câble
2. enfiler le câble dans l’embout
3. Préparation du câble réseau
4. Mettre les colliers plastique
5. Lovage des micromodules jusqu’à la
cassette coupleur
6. Lovage des fibres nues dans la cassette
coupleur
7. Mise en place du coupleur SoD
8. Épissurage du tronc et/ou des pigtails
1. Preparation of the plug
2. Put the cable in the grommet
3. Preparation of the network cable
4. Put the plastic ties
5. Coiling the microbundles up to the
splitter
cassette
6. Coiling bare fibres in the splitter cassette
7. Installation of the SOD splitter
8. Splicing the input and/or the pigtails
câble réseau
Network cable
Porteur
Strength member
Mèches aramides
Aramid yarns
2200mm
100mm
50mm
A. Dénuder la gaine du câble sur une
longueur de 2200mm
B. couper le porteur sur 50mm
c. couper les aramides sur 100mm
A. Strip the cable sheath on a length
2200mm
B. Cut the strength member on a 50mm
C. Cut the aramid on 100mm
Préparation du câble
Preparation of the cable
Micromodules
Microbundles