Copyright © 2023 NexCOBOT Co., Ltd. All Rights Reserved.
36
NEX 813 User Manual
Chapter 3: BIOS Setup
Boot
Quiet Boot
Enabled
Displays OEM logo instead of the POST messages.
Disabled
Displays normal POST messages.
Launch PXE ROM
Controls the execution of UEFI and legacy network OpROM.
Boot Option Priorities
Adjusts the boot sequence of the system. Boot Option #1 is the first boot
device that the system will boot from, next will be #2 and so forth.
Save & Exit
Advanced
Chipset
Security
Boot
Main
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enables or disables Quiet Boot
option
Boot Configuration
Quiet Boot
Launch PXE ROM
FIXED BOOT ORDER Priorities
Boot Option #1
Boot Option #2
Boot Option #3
Boot Option #4
Boot Option #5
Boot Option #6
Boot Option #7
Boot Option #8
Boot Option #9
Boot Option #10
Boot Option #11
Boot Option #12
Boot Option #13
Boot Option #14
Boot Option #15
Boot Option #16
[Enabled]
[Do not launch]
[UEFI USB Key]
[UEFI Hard Disk]
[UEFI USB Hard Disk]
[UEFI Network]
[UEFI USB Lan]
[UEFI CD/DVD]
[UEFI USB Floppy]
[USB Key]
[Hard Disk]
[USB Hard Disk]
[Network]
[USB Lan]
[CD/DVD]
[USB CD/DVD]
[USB Floppy]
Save & Exit
Save Changes and Reset
To save the changes and reset, select this field then press <Enter>. A dialog
box will appear. Confirm by selecting Yes.
Discard Changes and Exit
To exit the Setup utility without saving the changes, select this field then
press <Enter>. You may be prompted to confirm again before exiting.
Restore Defaults
To restore the BIOS to default settings, select this field then press <Enter>. A
dialog box will appear. Confirm by selecting Yes.
Save & Exit
Advanced
Chipset
Security
Boot
Main
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Reset the system after saving
the changes.
Save Options
Save Changes and Reset
Discard Changes and Exit
Default Options
Restore Defaults