Copyright © 2020 NEXCOM International Co., Ltd. All Rights Reserved.
36
NDiS M538 User Manual
Chapter 4: BIOS Setup
CPU - Power Management Control
Advanced
Version 2.20.1275. Copyright (C) 2020 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable/Disable CPU Power
Management. Allows CPU to go
to C states when it’s not 100%
utilized.
CPU - Power Management Control
Intel(R) SpeedStep(tm)
Turbo Mode
C states
[Enabled]
[Enabled]
[Disabled]
Intel
®
SpeedStep
TM
Enables or disables Intel SpeedStep technology.
Turbo Mode
Enables or disables turbo mode.
C states
Enables or disables CPU C states support for power saving.
PCH-FW Configuration
This section is used to configure the firmware update options.
ME State
Enables or disables ME state. When disabled, ME will be placed into ME
Temporarily Disabled Mode.
Manageability Features State
Enables or disables Intel
®
Manageability Features support in firmware. To
disable the support, the platform must be in an unprovisioned state first.
Advanced
Version 2.20.1275. Copyright (C) 2020 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
When Disabled ME will be put
into ME Temporarily Disabled
Mode.
ME Firmware Version
ME Firmware Mode
ME Firmware SKU
ME Firmware Status 1
ME Firmware Status 2
ME State
Manageability Features State
AMT BIOS Features
AMT Configuration
ME Unconfig on RTC Clear
Firmware Update Configuration
12.0.47.1524
Normal Mode
Corporate SKU
0x90000255
0x80108106
[Enabled]
[Enabled]
[Enabled]
[Enabled]