Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved.
5
Chapter 1: Product Introduction
IPPC 1632P/2132P Series User Manual
Specifications
Panel
▪
LED size: 21.5”, 16:9
▪
Resolution: Full HD 1920 x 1080
▪
Luminance: 300cd/m
2
▪
Contrast ratio: 5000
▪
LCD color: 16.7M
▪
Viewing angle: 89(U), 89(D), 89(L), 89(R)
▪
Backlight: LED
Touch Screen
▪
Ten points P-Cap (Projected Capacitive Touch)
▪
Touch light transmission: 87%
▪
Anti-scratch surface: 7H hardness
▪
Touch interface: USB
▪
Windows 8 compliance
System
▪
CPU: On-board Intel
®
Atom™ dual core processor D2550, 1.86GHz, 1M
L2 Cache
▪
BIOS: AMI BIOS
▪
System chipset: Intel
®
NM10 Express chipset
▪
System memory: 2 x 204-pin DDR3 SO-DIMM socket, 4GB DDR3 (default),
support up to 4GB DDR3-800/1066, non-ECC and unbuffered
▪
Storage device:
– 1x external locked CFast socket
– 1x hard drive bay: optional 1x 2.5” SATA HDD or 1x SATA DOM
▪
Watchdog timer: Watchdog timeout can be programmed by software
from 1 second to 255 seconds and from 1 minute to 255 minutes
(Tolerance 15% under room temperature 25°C)
▪
H/W status monitor: monitoring system temperature, and voltage
▪
Expansion: 2x Mini-PCIe sockets (support optional Wi-Fi, 3.5G module or
fieldbus card)
▪
Panel backlight control button: increase brightness/decrease brightness/
backlight on/off
▪
Front Logo LED indicator to show operating status
Rear I/O
▪
Ethernet: 2x RJ45
▪
2nd display VGA port: 1x DB15
▪
Audio port: 1x Line-out
▪
USB: 4x USB 2.0
▪
Power switch
▪
Reset button
▪
DIO w/ 2.5kv isolated:
4x Digital Input (source type)
– Input voltage (dry contact): Logic 0: Close to GND
– Logic 1: Open
– Input voltage: Logic 0: 3V max
– Logic 1: +5V ~ +30V
4x Digital Output (sink type)
– Output voltage: 3.6V ~ 5V
– Sink current: 200 mA max. per channel
▪
COM #1: RS232/422/485 w/ 2.5kv isolated
▪
COM #2: RS232/422/485 w/ 2.5kv isolated
