Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
32
Chapter 2: Camera Configuration
NCr-302-VHR User Manual
IPFilter
This section configures the IP address filtering function.
General
Enable IP Address Filtering
Enables or disables the filtering of the specified IP address. Select
Allow
or
Deny
in the drop-down menu to specify the type of filtering rule applied to
the IP address entered.
Filtered IP Address
IP Address
Enter the IP address to filter and click the
Add
button to add it to the filter
list. To remove an IP address from the filter list, type in the desired IP address
and click the
Remove
button.
Filtered IP Address Setup
The IP addresses filtered will be listed here. A total of 255 IP addresses can
be added to the list.
Save
Save button to apply the configurations, click on this button once all the
settings are confirmed for the new changes to take effect.
Reset
Reset button to discard all the settings applied.
