Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
51
Chapter 2: Camera Configuration
NCr-302-VHR User Manual
IR Cut Filter (ICR) Control
Auto
When enabled, the camera will automatically turn the infrared lights on or
off based on the lighting levels in the environment.
Day Mode
Enables day mode and turns the IR cut filter control off.
Night Mode
Enables night mode and turns the IR cut filter control on.
Schedule ICR
Enables or disables IR cut filter control function to activate at the specified
time. You can configure the
Start Time
and
End Time
in 24-hour format.
Use Mode (During Scheduled Hours)
Selects the IR cut filter control mode to use during the scheduled time.
Use Mode (Outside of the Scheduled Hours)
Selects the IR cut filter control mode to use outside of the scheduled time.
IR LED Control
Auto Control by Light Sensor
When enabled, the camera will automatically turn the infrared LEDs on or
off based on the amount of light received by the image sensor.
Turn-on
Turns the IR LED on.
Turn-off
Turns the IR LED off.
Camera Settings (Advanced) Cont.
