Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
42
NDiS M532 User Manual
Chapter 4: BIOS Setup
Advanced
Boot
Security
Save
&
Exit
Main
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or disable bytes 38h-3Fh
in the upper and lower 128-byte
bank of RTC RAM lockdown.
RTC RAM Lock
[Disabled]
Lock Down Setting
This section is used to configure the RTC lock settings.
RTC RAM Lock
Enables or disables bytes 38h-3Fh in the upper and lower 128-byte bank of
RTC RAM lockdown.
Advanced
Boot
Security
Save
&
Exit
Main
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Select AC power state when
power is re-applied after a power
failure.
Restore AC Power Loss
[Power Off]
PCH-IO Configuration
This section is used to configure PCH parameters.
Restore on AC Power Loss
Power Off
When power returns after an AC power failure, the
system’s power is off. You must press the Power button
to power-on the system.
Power On
When power returns after an AC power failure, the system
will automatically power-on.
