background image

Copyright © 2018 NEXCOM International Co., Ltd. All Rights Reserved.

4

NISE 107 User Manual 

Chapter 1: Product Introduction

Construction

 

Aluminum chassis with fanless design

Environment

 

Operating temperature:

  Ambient with air flow: -20°C to 70°C 

(NISE 107)

  Ambient with air flow: -5°C to 55°C 

(NISE 107-E3940 & NISE 107-POE)

  (According to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14)

 

Storage temperature: -20°C to 80°C

 

Relative humidity: 95% at 40 degree C

 

Shock protection: 

 

– HDD: 20G @ wall mount, half sine, 11ms (operation), IEC60068 2-27

 

– M.2: 50G @ wall mount, half sine, 11ms (operation), IEC60068 2-27

 

Vibration protection w/ HDD condition:

 

– Random: 0.5Grms @ 5~500 Hz, IEC60068-2-64

 

– Sinusoidal: 0.5Grms @ 5~500 Hz, IEC60068-2-6

 

Vibration protection w/ M.2 & SSD condition:

 

– Random: 2Grms @ 5~500 Hz, IEC60068-2-64

 

– Sinusoidal: 2Grms @ 5~500 Hz, IEC60068-2-6

Certifications

 

CE approval

 

– EN61000-6-2

 

– EN61000-6-4

 

FCC Class A

OS Support List

 

Windows 10 IoT Enterprise, 64-bit

 

Linux Kernel version 4.1

Summary of Contents for NISE 107 Series










































































Reviews: