Copyright © 2018 NEXCOM International Co., Ltd. All Rights Reserved.
40
NSA 7145 User Manual
Chapter 4: BIOS Setup
Data Bits
The options are 7 and 8.
Parity
A parity bit can be sent with the data bits to detect some transmission errors.
Even
Parity bit is 0 if the number of 1’s in the data bits is even.
Odd
Parity bit is 0 if number of 1’s in the data bits is odd.
Stop Bits
Stop bits indicate the end of a serial data packet. (A start bit indicates the
beginning). The standard setting is 1 stop bit. Communication with slow
devices may require more than 1 stop bit.
Flow Control
Flow control can prevent data loss from buffer overflow. When sending data
and the receiving buffers are full, a “stop” signal can be sent to stop the
data flow.
VT-UTF8 Combo Key Support
Enables or disables VT-UTF8 combo key support.
Recorder Mode
When this field is enabled, only text will be sent. This is to capture the
terminal data.
Resolution 100x31
Enables or disables extended terminal resolution.
Legacy OS Redirection
Selects the number of rows and columns that support redirection.
Putty KeyPad
Selects the Putty keyboard emulation type.
Redirection After BIOS POST
Enables or disables redirection after BIOS POST.
Legacy Console Redirection Settings
Advanced
Version 2.19.1268. Copyright (C) 2017 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
Select a COM port to display
redirection of Legacy OS and
Legacy OPROM Messages
Legacy Serial Redirection Port
[COM0]
Legacy Serial Redirection Port
Configures the COM port to display redirection of legacy OS and legacy
OPROM messages.
