Copyright © 2018 NEXCOM International Co., Ltd. All Rights Reserved.
39
PEAK 889VL2 User Manual
Chapter 3: BIOS Setup
Hardware Monitor
This section is used to monitor hardware status such as temperature, fan
speed and voltages.
FAN Setting
Configures the operating mode of the fan.
Set Temp.-active S.F.
Configures the temperature threshold to activate smart fan.
Set Temp.-active full run
Configures the temperature threshold to activate the fan in full speed.
Advanced
Version 2.20.1271. Copyright (C) 2018 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Pc Health Status
FAN Setting
Set Temp.-active S.F.
Set Temp.-active full run
Initial FAN speed (S.F.)
Cpu temperature
System temperature2
CPU FAN
SYSTEM FAN
Vcore
+3.3V
+12V
+5V
[Enable Smart Fan]
[67 C]
[82 C]
[50 %]
: +40 ºc
: +30 ºc
: 2311 RPM
: N/A
: +1.026
: +3.408 V
: +12.471 V
: +5.167 V
Initial FAN Speed (S.F.)
Configures the starting fan speed of smart fan.
Cpu temperature
Detects and displays the current CPU temperature.
System temperature2
Detects and displays the current system temperature.
CPU FAN
Detects and displays the current CPU fan speed.
SYSTEM FAN
Detects and displays the current system fan speed.
Vcore
Detects and displays the Vcore voltage.
+3.3V
Detects and displays 3.3V voltage.
+12V
Detects and displays 12V voltage.
+5V
Detects and displays 5V voltage.