Copyright © 2018 NEXCOM International Co., Ltd. All Rights Reserved.
43
TPPC 2210 and TPPD 2200 Series User Manual
Chapter 3: System Setup
C
haPter
3: s
ystem
s
etuP
Removing the Chassis Cover
Prior to removing the chassis cover, make sure the unit’s power
is off and disconnected from the power sources to prevent
electric shock or system damage.
CAUTION!
CAUTION!
CAUTION!
1. Remove the mounting screws around the chassis cover and then remove
the cover.
2. Align the mounting holes that are on the sides of the SATA drive with the
mounting holes on the drive bay and then use the provided mounting
screws to secure the drive in place.