Copyright © 2018 NEXCOM International Co., Ltd. All Rights Reserved.
57
TPPC 2210 and TPPD 2200 Series User Manual
Chapter 4: BIOS Setup
Super IO Configuration
This section is used to configure serial ports 1 to 4 of the super IO.
Super IO Chip
Displays the Super I/O chip used on the board.
OS Select for Serial Port
Configures which operating system to enable serial port support.
Case Open Detect
Enables or disables case open detection feature.
Advanced
Version 2.16.1243. Copyright (C) 2013 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Set Parameters of Serial Port
1 (COMA)
Super IO Configuration
Serial Port 1 Configuration
Serial Port 2 Configuration
Serial Port 3 Configuration
Serial Port 4 Configuration
OS Select For Serial Port
WatchDog Timer
WatchDog Wake-up Timer in ERP
ATX Power Emulate AT Power
Case Open Detect
[Windows]
[Disabled]
[Disabled]
-Enabled-
[Disabled]
WatchDog Timer
Enables or disables watchdog timer control. When enabled, the following
sub-menus are available:
WatchDog Timer Value
Configures the watchdog timer value.
WatchDog Timer Unit
Configures the metrics used for the watchdog timer.
WatchDog Wake-up Timer in ERP
Enables or disables watchdog wake-up timer when ERP function is disabled.