Copyright © 2018 NEXCOM International Co., Ltd. All Rights Reserved.
60
TPPC 2210 and TPPD 2200 Series User Manual
Chapter 4: BIOS Setup
SmartFAN Configuration
This section is used to configure the fan settings.
CPUFAN Type
Configures the CPU fan type to 3-pin or 4-pin.
CPUFAN Smart Mode
Enables of disables CPU fan smart mode. When enabled, the following sub-
menus are available:
CPUFan Full-Speed Temperature
Configures the temperature threshold of full speed. Fan will activate at full
speed when temperature threshold is exceeded.
Advanced
Version 2.16.1243. Copyright (C) 2013 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
SmartFAN Configuration
CPUFAN Type
CPUFAN Smart Mode
CPUFAN Full-Speed Temperature
CPUFAN Full-Speed Duty
CPUFAN Idle-Speed Temperature
CPUFAN Idle-Speed Duty
[3-Pin]
[Enabled]
75
100
40
40
CPUFan Full-Speed Duty
Configures the pre-set duty threshold of full speed. Fan will activate at full
speed when the pre-set duty is exceeded.
CPUFan Idle-Speed Temperature
Configures the temperature threshold of idle speed. Fan will activate at idle
speed when the temperature is below the threshold.
CPUFan Idle-Speed Duty
Configures the pre-set duty threshold of idle speed. Fan will activate at idle
speed when the pre-set duty is below the threshold.
