Copyright © 2018 NEXCOM International Co., Ltd. All Rights Reserved.
66
TPPC 2210 and TPPD 2200 Series User Manual
Chapter 4: BIOS Setup
CPU PPM Configuration
This section is used to configure the Processor Power Management (PPM)
configuration.
Advanced
Version 2.16.1243. Copyright (C) 2013 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable/Disable Intel SpeedStep
PPM Configuration
EIST
CPU C state Report
Enhanced C state
Max CPU C-state
[Enabled]
[Enabled]
[Enabled]
[ C7]
EIST
Enables or disables Intel
®
SpeedStep.
CPU C State Report
Enables or disables CPU C-State report to OS.
Enhanced C State
Enables or disables enhanced C-State.
Max CPU C-state
This option controls the max C-State that the processor will support.
Advanced
Boot
Security
Save
&
Exit
Main
Version 2.16.1243. Copyright (C) 2013 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable / Disable Serial ATA
SATA Configuration
SATA Port
SATA Mode
SATA Speed Support
SATA Port1
mSATA/SATA Port2
SATA Port
TS64GSSD320 (64.0GB)
mSATA
Not Present
[Enabled]
[AHCI Mode]
[Gen2]
[Enabled]
[Enabled]
SATA Configuration
This section is used to configure the SATA drives.
SATA Port
Enables or disables the SATA port.
SATA Mode
IDE
This option configures the Serial ATA drives as Parallel ATA
physical storage device.
AHCI This option configures the Serial ATA drives to use AHCI
(Advanced Host Controller Interface). AHCI allows the storage
driver to enable the advanced Serial ATA features which will
increase storage performance.