Copyright © 2018 NEXCOM International Co., Ltd. All Rights Reserved.
73
TPPC 2210 and TPPD 2200 Series User Manual
Chapter 4: BIOS Setup
USB Configuration
USB 3.0 Support
Enables or disables the USB 3.0 controller.
USB 3.0 Link Power Management
Enables or disables USB 3.0 link power management.
Chipset
Version 2.16.1243. Copyright (C) 2013 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Control the USB 3.0 functions
USB Configuration
USB 3.0 Support
USB 3.0 Link Power Management
USB 2.0 Support
[Auto]
[Enabled]
[Disabled]
Security
Save & Exit
Advanced
Chipset
Security
Boot
Main
Version 2.16.1243. Copyright (C) 2013 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Set Administrator Password
Password Description
If ONLY the Administrator’s password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User’s password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User Will
have Administrator rights.
The password length must be
in the following range:
Minimum length
3
Maximum length
20
Administrator Password
User Password
Administrator Password
Select this to reconfigure the administrator’s password.
User Password
Select this to reconfigure the user’s password.
