Copyright © 2019 NEXCOM International Co., Ltd. All Rights Reserved.
47
TPPC 2401/2701/3201 User Manual
Chapter 4: BIOS Setup
USB Configuration
Chipset
Version 2.18.1263. Copyright (C) 2019 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Once enabled, XHCI controller
would be function disabled,
none of the USB devices are
detectable and usable during
boot and in OS. Do not disable
it unless for debug purpose.
xHCI Mode
[Enable]
xHCI Mode
Enables or disables XHCI mode. When enabled, XHCI controller would be
disabled and none of the USB devices are detectable and usable during boot
and in OS. Do not disable it unless for debugging purposes.
Security
Save & Exit
Advanced
Chipset
Security
Boot
Main
Version 2.18.1263. Copyright (C) 2019 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Set Administrator Password
Password Description
If ONLY the Administrator’s password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User’s password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
The password length must be
in the following range:
Minimum length
3
Maximum length
20
Setup Administrator Password
User Password
Setup Administrator Password
Select this to reconfigure the administrator’s password.
User Password
Select this to reconfigure the user’s password.
