6
7
1
1
TABLE OF CONTENTS
TABLE OF CONTENTS
Service
1. Important notes
1.1. Imprint/ validity information
1.2. About this instruction manual/intended use
1.3. General safety instructions
1.4. Safety symbols used in the manual
1.5. Sustainability
1.6. Check scope of delivery and handling
1.7. Site location
1.8. Cleaning/maintenance/transport
1.9. Protection and storage
1.10. Disposal
2. Introduction
What you can expect
3. Design of Trino Zoom Stereo Microscope
3.1. Product image NSZ818 – zoom stereo microscope
3.2. Assembly of the NSZ818 zoom stereo microscope
3.2.1. Detailed assembly procedure
1 Mounting the stand column
2 Mounting the zoom unit
3 Attaching the trinocular viewing head
4 Inserting the eyepieces
5 Attaching the plan Apo 1x objective
6 Placing the glass plate
7 OPTIONAL – Capturing images
4. Adjust microscope
4.1. Quick Guide
4.2. Detailed description of the Quick Guide steps
1 Setting up the power supply and start-up
2 Placing the specimen on the glass plate
3 Switching on the lighting and brightness control
4 Direct light to the eyepieces or to the camera
5 Settings on the trinocular viewing head
6 Settings on the zoom unit
7 Further adjustment options on the stand base
8 AFTER OBSERVATION: Switch off the microscope
5.
Optical design: Parallel light (zoom type)
6.
Scope of delivery
7.
Technical specifications
8. Trouble shooting guide
9. Dimensions
10. Warranty
11. Notes/comments
1.
IMPORTANT NOTES
This chapter informs the user about the general instructions for the microscope and
the important safety symbols.
1.1. Imprint/validity information
Imprint
Bresser GmbH
Gutenbergstraße 2
46414 Rhede Deutschland
http://www.bresser.de
For information regarding liability claims or service requests, please refer to
chapters "Warranty" and "Service" in this documentation. Errors reserved -
technical specifications subject to change.
Copyright: 2022 Bresser GmbH
All rights reserved.
It is not allowed to reproduce this documentation or parts of it in any kind (e.g.
photocopying, printing, etc.) without written a permission of the manufacturer or
the distributor, Bresser GmbH. It is also prohibited to use or transmit this documen-
tation with electronic systems (e.g. image file, website, etc.). The descriptions and
brand names of the corresponding firms used in this documentation are generally
protected under trademark, brand and/or patent law for Germany, for the European
Union and/or other countries.
Validity information
This documentation is valid for the products with the article numbers listed below:
NSZ818
Manual version:
v122021a
Manual description:
Manual_ NX60818_NSZ818_en_NEXCOPE_v122021a
For any inquiries, please state these information.
1.2. About this instruction manual/intended use
About this instruction manual
These operating instructions are to be considered a component of the
device.
PLEASE READ THE SAFETY INSTRUCTIONS AND THE OPERATING INST-
RUCTIONS CAREFULLY BEFORE USE
. Keep these instructions available for
further reference when using the microscope. When the device is sold or given to
someone else, the instruction manual must be provided to the new owner/user of
the product.
Intended use
• This product is intended for private and corporate use.
•
It was developed for the magnified display of things in nature.
• The device is intended only for indoor use.
This device is not intended for use by individuals (including children) with limited physical,
sensory or mental capabilities or those lacking in experience and/or knowledge, unless they are
supervised by an individual responsible for their safety or have received instructions from them
regarding the use of the device.
Table of contents NSZ818
