LIGHTING INSTRUCTION
BEFORE TURNING ON THE GAS SUPPLY:
Be sure all gas connections are tight and there are no leaks.
Make sure surrounding areas are free of combustible materials, gasoline, and other flammable
vapors or liquids.
BEFORE RE-LIGHTING:
For your safety, if re-lighting a hot heater, always wait at least five (5) minutes.
NOTE: 16.4 oz Propane tank must be used
TO LIGHT:
(A) Open tank enclosure door.
(B) Make certain regulator is connected to the gas tank. Check the connection to ensure they are tight and
leak proof.
(C) Check for leaks by applying soapy water to the tank and regulator connections.
(D) Push and turn the gas control knob to ‘HIGH’ postion for several seconds. It might take 2 or 3 trials to
light the burner.
!
Warning: Keep a safe distance of at least 3 feet when attampting to ignite unit.
Avoid inhaling fumes emitted from the heater’s first use. Smoke and odor from the burning
of oils used in manufacturing will appear. Both smoke and odor will dissipate after
approximately 30 minutes. The heater should NOT produce thick black smoke.
"
Page 9
