PS8 accessories UK
p.2/6
Rev 2.0
FS0081-001
This accessory is designed to be mounted directly
onto the PS8 cabinet surface. It provides 2 M10
captive nuts that allows the following accessories to
be fitted: (not supplied in this kit)
•
Standard lighting hook/CLAMP
•
M10 lifting eye bolt
•
DIN Pivot (TV spigot)
•
NEXO FS0081-002
The package contains 2 M5x25 TORX button head
screws, 2 5mm Star Washers and a M10 nut.
A
SSEMBLAGE
To fit the FS0081-001 directly to the PS8 cabinet,
first remove the 2 original M5x25 screws supplied
with the PS8 on the required mounting surface fix
the accessory with the 2 screws and washers
supplied in the package.
If you plan to use the FS0081-002 Accessory please
use the fixing holes near the angled side of the
accessory to maintain the centre of gravity.
IMPORTANT
Do not mount this accessory in any other position on
the PS8 cabinet other than a surface, which is
equipped with two manufacturer M5 captive nuts.
WARNING!
This device has been designed to withstand the load
of a single PS8. Always use a stop nut when using
additional flying accessories.
When using the PS8 series cabinets in applications
where their placement will be in Public areas and
above head height the Security Kit SA0081-001 must
be used. Secondary safety steel must be installed
once the cabinet has been placed in its final
operating place. Secondary steels must be fitted
irrespective of the local safety standards applicable
to your territory
Exemples d’application
