PS8 accessories UK
p.3/6
Rev 2.0
FS0081-002
This accessory provides 2 welded M5 nuts and 1 welded
M10 nut. (It should always be used along with the
FS0081-001.) This adapter allows the cabinet to be
fixed on the wall, ceiling or on a stand using the
FS0081-003
The package contains:
•
1 locking knob (M10x30)
•
2 M5x12 TORX button head screws
•
2 5mm Star Washers
•
1 10mm Washer
A
SSEMBLY
After the correct placement of accessory FS0081-001
(required for use with FS0081-002) onto the required
surface of the PS8 cabinet, this accessory will allow
the PS8 cabinet to be wall or ceiling mounted. Make
sure this accessory is fixed to the wall or ceiling before
final connection to the PS8 cabinet Please read all
assembly instructions for FS0081-001 and 002 before
you start installation.
IMPORTANT
Accessory FS0081-001 MUST always is used in
conjunction with FS0081-002. Do not mount this
accessory in any other position on the PS8 cabinet
other than a surface that is equipped with two
manufacturer M5 captive nuts.
WARNING!
This device has been designed to withstand the load of
a single PS8. Always use a stop nut when using
additional flying accessories.
When using PS8 series cabinets in applications where
their placement will be in Public areas and above head
height the Security Kit SA0081-001 must be used.
Secondary safety steel must be installed once the
cabinet has been placed in its final operating place.
Secondary steels must be fitted irrespective of the
local safety standards applicable to your territory
