2 Quick Installation
2
Quick Installation
2.1
Installation Attentions
To avoid unexpected accident or device damage, please read the following instructions before
installing the FXO GW device:
Gateway-128o is equipped with RJ45 ports;
Anti-jamming: to reduce the interference with telephone calls, it’s highly recommended
that telephone lines connected to the gateway should be placed away from power cables;
Power supply: the gateway accepts AC input voltage of 100-240V. Please ensure safe and
stable power supply;
Network bandwidth: please ensure there is enough network bandwidth so as to guarantee
stabilized running of the gateway
;
Ventilation: to avoid overheating, please do not pile up the gateway with other devices and
make sure the gateway has good ventilation around.
Temperature and humidity: to avoid any accident that might cause malfunction, it’s
advised to install the gateway in an equipment room where temperature and humidity are
appropriate;
Mechanical load: please make sure the gateway is placed steadily to avoid damage. It’ s
highly advised to horizontally place the gateway on a
fl
at surface or a cabinet.
2.2
RJ45 Wire Sequence
Gateway-128o is equipped with RJ45 interface as FXO port. The internal wire sequence of
RJ45 cable is shown as follows:
Gateway-128o User Manual
11
Summary of Contents for FXO-128o
