4 Configurations on Web Interface
Table 4.13.8 Explanation of Record Parameters
Parameter
Explanation
RCD
Enable or disable the record function
Server Address
Set the record server address, IP address or domain name
Rcd Port
Recording server port (The default is 2999)
Rcd Period Select
Only record within the set time range, support 3 recording periods
Rcd Directly To
In the NAT environment, the recording can be directly sent to the
Server
public network
4.13.9
Radius Parameter
After the Radius server is configured, you can log into the gateway after successful Radius
authentication. The Radius server configuration page is shown in Figure 4-13-9:
Table 4.13.9 Explanation of Parameters for Radius Config
Parameter
Explanation
Radius
Enable or disable Radius
Gateway-128o User Manual
74
Summary of Contents for FXO-128o
