4 Configurations on Web Interface
Port
Select ports for this port group
4.11.2
IP Trunk
A peer-to-peer VoIP call occurs when two VoIP phones communicate directly over IP
network without IP PBX between them. IP trunk helps establish peer-to-peer call between
gateway and VoIP phones. IP trunk will be used in routing configuration.
Figure 4-11-2 Configure IP Trunk
Table 4.11.2 Explanation of IP Trunk Parameters
Parameter
Explanation
Index
The No. of the IP trunk; range is from 0 to 127.
Description
The description of the IP trunk; it is used to n identify the IP trunk.
Remote Address
IP address or domain name of the peer device
Remote Port
SIP port of the peer device
Whether to enable the ‘Heartbeat’ function for the IP trunk. Default value
Heartbeat
is ‘not enable’. If heartbeat is enabled, the device will send “OPTION”
to the peer device.
4.11.3
Routing Parameter
Routing parameter determines a call is routed before or after manipulation.
Gateway-128o User Manual
58
Summary of Contents for FXO-128o
