4 Configurations on Web Interface
There are three kinds of IP address for the WAN port and LAN port:
DHCP: Obtain IP address automatically
. FXS GW is regarded as a
DHCP client, which sends a broadcast request and looks for a DHCP
server from the LAN to answer. Then the first discovered DHCP server
automatically assigns an IP address to the FXS GW from a defined
range of numbers.
Static IP Address:
Static IP address is a semi-permanent IP address and
remains associated with a single computer over an extended period of
time. This differs from a
dynamic IP address,
which is assigned
ad
hoc
at the start of each session, normally changing from one session to
the next.
If you choose static IP address, you need to fill in the following
information:
l
IP Address: the IP address of the WAN port of the FXS GW;
l
Subnet Mask: the netmask of the router connected the FXS GW;
l
Default Gateway: the IP address of the router connected the
FXS GW;
PPPoE:
PPPoE is an acronym for point-to-point protocol over Ethernet,
IP Address
which relies on two widely accepted standards: PPP and Ethernet.
PPPoE is a specification for connecting the users on an Ethernet to
the Internet through a common broadband medium, such as a
single DSL line, wireless device or cable modem. PPPOE IP address
refers to IP address assigned through the PPPoE mode.
If you choose PPPoE, you need to fill in to fill in the following
information:
l
Username: the account name of PPPoE
l
Password: the password of PPPoE
l
Server Name: the name of the server where PPPoE is placed
DNS Server
IP addresses of primary DNS server and standby DNS server are displayed.
Cloud Register
Whether the FXS GW device is registered to cloud or not.
Status
System Uptime
The running time of the FXS GW device since it is powered on.
Succeed: the FXS GW device is sync to NTP server successfully;
NTP Status
Failed: the FXS GW device fails to be sync to NTP server. Then you
should check network connection and the NTP server.
WAN Traffic
Total bytes of message received and sent by WAN port.
Statistics
Usage of Flash
Detailed usage of Flash memory
Usage of RAM in
detailed RAM usage of Linux core
Linux
Gateway-128s User Manual
21
Summary of Contents for FXS-128s
