4 Configurations on Web Interface
Table 4- 4 Explanation of Parameters for SIP Server
Choose SIP protocol stack, support IPv4 and IPv6, please choose
IP Protocol for SIP Stack
the corresponding protocol according to the actual connected
server
SIP Server Address
The IP address or domain name of the SIP server. It is provided
by VoIP service provider.
SIP Server port
The service port of the SIP server. It is 5060 by default.
It is used to avoid excessively frequent registrations.
Registration Expires
When the time that is set expires, the FXS GW device will send
register request to the SIP server. The time is 300s by default.
Heartbeat
Heartbeat is used to check the connection between the FXS GW
device and SIP server.
Outbound Proxy Address
The IP address or domain name of outbound proxy server, which
is provided by VoIP service provider.
Outbound Proxy Port
Service port of outbound proxy server. It is 5060 by default.
Retry Interval when
The retry interval after a registration fails. Default: 30s
Registration failed
Registration times per
The maximum number of registrations in a second. 0 means no
second
limitation for registrations.
Gateway-128s User Manual
30
Summary of Contents for FXS-128s
