4 Configurations on Web Interface
Figure 4- 27 Configure Timer in SIP Protocol
Table 4- 11 Explanation of Timer Parameters in SIP Protocol
T1
Value of T1 timer in SIP protocol, default is 500ms
T2
Value of T2 timer in SIP protocol, default is 4000ms
T4
Value of T4 timer in SIP protocol, default is 5000ms
Max Timeout
The max timeout of sending or receiving SIP messages, default
is 32000ms
Heartbeat Interval
The interval for sending heartbeat message, Default is 10s.
Heartbeat Timeout
The timeout for heartbeat message to be sent, default to 16s
Username of
The user ID part of OPTION SIP message in the heartbeat
OPTION(Heartbeat) for
request for SIP server
“SIP Server”
Username of
The user ID part of OPTION SIP message in the heartbeat
OPTION(Heartbeat) for
request for IP trunk
“IP TRUNK”
Release all call when
If enabled, when the heartbeat times out, all calls will be
Heatbeat Timeout
disconnected
User-Agent Header
Customize User-Agent header field value
Response code when Fax
Customize the SIP response code when fax re-invite was
Reinvite was Rejected
rejected
Gateway-128s User Manual
49
Summary of Contents for FXS-128s
