CB-Series Data Buoy Instrument Cage Installation
The
attaches to the bottom of CB-Series buoys for water sensor deployments while
simultaneously lowering the center of gravity and increasing stability.
Model number CAGE is 39″ (99 cm) in length and is normally used with the CB-50, CB-150, CB-250 and
CB-450 buoys. It is an optional accessory for the CB-50 and comes standard with the others.
Model number CAGE-L is 44″ (112 cm) in length and has a wider profile. It comes standard with CB-
650, CB-950 and CB-1250 buoys.
The cage is a critical component of the
of a data buoy and provides a mounting location
for additional ballast weight to be added as needed.
Attachment to the internal frame of a data buoy is simple using the provided hardware.
1. Use the provided bolt, lock washer and castle nut to attach the cage to the buoy frame.
Model CAGE instrument cage.
Model CAGE-L instrument cage.
Bolt installation and cage connection.
19
