d. Note that some instrument types have a number of different configurations which may affect power
performance. The predefined sensors in the drop-down list are set up based on a typical configuration
and information provided by the manufacturer or NexSens bench testing where applicable. These
therefore represent a best approximation based on available information. However, these may also be
edited manually in the Sensor Details section of the Power Budget Calculation tab if more precise
information is available.
4. Once all sensor information is entered, select a deployment location from the drop-down list. The predefined
list contains locations throughout the world, and it is normally sufficient to select the closest possible
location provided that the latitude and general climate conditions are similar. However, if an appropriate
location does not appear to be available, it is recommended to contact NexSens as new locations can
normally be added quickly upon request.
5. Select which months of the year the system is expected to be deployed. In many cases, all months will be
selected, and December will be the limiting month for sites in the northern hemisphere. However, this option
is given because, particularly for data buoy systems, some applications require only seasonal or short-term
deployment.
6. Having entered all equipment information and deployment site conditions, the Results section will now
display the calculated results.
Select deployment location.
Select months of active deployment.
Calculated results display.
14
Summary of Contents for X2-CB
