1. Drill two holes and insert an appropriate wall plug into
each. Insert the screws and tighten,leaving the screw head
exposed by about 1/4 inch(6mm)
Warning:
Always ensure intended wall area to be drilled is free
from hidden electrical wires, water and gas pipes.
NB: Wall fixings are not included - please source
suitable fixings for your wall type. If in doubt please
consult a qualified trades person.
2. Lift the mirror into position ensuring that the fixing clips
attached to the mirror are the fixing clips attached to the
mirror are firmly hooked over the screw heads. Check the
mirror periodically to see that no fitting has loosened and
needs attention.
STEP TWO
PACKAGING LAYOUT
TEMPLATE
TEMPLATE
A
page 3 of 4
