www.nextups.eu
10
6. Functions & Operation
I: DC Start Function
DC Start Function enables UPS to be started up when AC utility power is
not available and battery is fully charged. Just simply press the power
switch to turn on the UPS.
II: Green Power Function
These series are equipped with Green Power Function for saving power
and protecting battery. The feature of deep discharge protection is adoped
on battery mode. If no or light load is connected to the UPS, it will
automatically shut down after 5 minutes for energy saving while running on
battery mode (Disable by default). The UPS will restart while AC recovery.
The green power function can be enable only by NEXTVision monitoring
software.
III: AVR (Automatic Voltage Regulation)
If the quality of the incoming mains is poor, the AVR boosts a low incoming
voltage or reduces a high one. The load receives a voltage within the
normal range.
IV: Auto restart while AC recovery
V: Audio Indicator
Audible Alarm
Situation
Sounding every 10 seconds
Battery Mode
Sounding every 3 seconds
Battery Low
Sounding every 3 seconds
Overload
Sounding every 1 seconds
Faulty
