030
www.ruggedaq.com
DATALOGGER
NI2400
NI2400
031
www.ruggedaq.com
DATALOGGER
NI2400
NI2400
Display Overview
Display main page has three icons in the middle and some information in the upper and
lower part of the display.
The information shown in the main page are:
• Date and time
• IP address
• External powering voltage or internal batteries percentage.
• Internal temperature
Icons in the main page have the following meaning:
LOG:
It shows last reading stored for each sensor configured on the NI2400. Through “Right”
and “Left” keys is possible to browse the different sensors.
To return to main menu press “Enter” key.
Icons
Date and Time
IP address
Powering
Humidity
on early models
Temperature
DL:
It shows NI2400 current status.
To return to main menu press
ACQUISITION
It is possible to see in real time the current acquired channel. Select-
ing “Acquisition” between one measureing cycle and the other, an
extemporaneous acquisition will be instantly executed.
START DL
Start the data logger if not already running.
STOP DL
Stop the data logger if running.
TEST FTP
Test FTP parameters with sample file.
TEST MAIL
Test Mail parameters with sample email.
TEST ALL
Test both FTP and Mail.
SYS:
Here you can find NI2400 connection parameters (network card), calibration values
and functions to download data on USB pen drive, update firmware and NI2400 stop (in
safety mode before cutting the power).
2
2