038
www.ruggedaq.com
DATALOGGER
NI2400
NI2400
039
www.ruggedaq.com
DATALOGGER
NI2400
NI2400
3
2
• Through “Up” or “Down” keys select “English” and press “Enter” key:
• The selected language will be displayed. Using “Left” and “Right” key is possible to slide
among the different languages. Select the chosen language and press “Enter” key:
• Display interface language will be changed in the selected one.
NOTE:
actually the available languages are ITALIAN ENGLISH AND FRENCH
WEB INTERFACE
WEB PAGES FUNCTIONALITY
Follows a brief description of the main NI2400 web pages.
STATUS
: Shows NI2400 status. In this page is shown the current NI2400 mode:
Run:
NI2400 is set and started. It will start acquisitions according to selected configura
-
tion.
Config:
NI2400 is in configuration mode. No acquisitions are in progress. In this mode is
possible to modify configuration parameters (channel configurations, acquisition time,
etc…), delete and download logs.
“Config” mode is expected only for “Admin” user
Stop:
NI2400 is stopped. No acquisitions are in progress. In this mode is possible to
download logs but is not possible to change the configuration.
Moreover is possible to start, stop and set the NI2400 in configuration mode.
CONFIGURATION-ACQUISITIONS
: in this page is possible to set acquisition frequency.
CHANNELS CONFIGURATION-LOCALS:
in this page is possible to set local analog channels
on the NI2400.
CHANNELS CONFIGURATION –MULTIPLEXER:
in this page is possible to set multiplexer
boards and their channels.
ATTENTION: For sensors wiring it is necessary refers to the schemes on the NI2400 web
pages.
CHANNELS CONFIGURATION - DIGITALS:
In this page is possible to set digital channels to
allow the NI2400 to read digital instruments.
DATA MONITOR - MEASURE
: In this page is possible to display last NI2400 acquisition
cycle. It’s also possible to download NI2400 executed and saved acquisitions.